with the approach of the heating season, many homeowners have recently started to install the home heating system. for home users, is the air conditioning heating installed, or the radiator (radiator) heating? let the radiator expert give you a wave of analysis.first, the heating system construction time comparisonair-cond...

the high-pressure cast aluminum radiator was first born in europe in the 1960s. after half a century of practical application and technological innovation, it has consistently ranked among the worlds top heating radiators with its excellent comprehensive cost performance. it has been widely used in europe and has become th...

1. common faults: the heating is not hot overall.remedy: open the inlet and outlet valves.2. common faults: the heating is not hot (the valve is open); the heating is not hot at half; there is water in the heating. remedy: there may be gas in the heater and it needs to be deflated.method 1: first close the inlet valve. ope...

i want the radiator to last for a long time, how to maintain it. the radiator is a kind of heating equipment that works in a corrosive environment for a long time. how to effectively extend the life of the radiator to reduce the unnecessary trouble caused by replacing the radiator. below are four ways to extend the life of...

the radiator installation is the second thing that needs to be done after the purchase of the radiator. the general consumer is not sure about the installation method of the radiator and the tools required for installation. therefore, most consumers will choose to hire a professional installer to install the radiator. due ...

radiator convection heat dissipation is the mainstream heat dissipation method in the industry. this heat dissipation method has a fast heat dissipation rate, but there are many factors that affect heat dissipation. so what are the factors that affect the convection heat dissipation of the heating radiator? lets take a loo...

the knowledge of the radiator knowledge class: 1. the heating company will put a lot of chemical drugs in the heating pipe; 2. the general radiator should be cleaned once in 5 years; 3. if the internal scale is generated, it needs regular cleaning; 4. internal the rubber pad can not be used again; 5. during the cleaning an...

at present, the more radiators sold in the southern market are made of steel radiators, and the radiators that are not much in the north are cast iron radiators. so why can steel radiators be so hot in the southern market? what are the characteristics of steel radiators?1. the new steel radiator radiator reduces the weldin...

one: should be low and should not be highaccording to the air principle, the hot air rises and the cold air sinks. the higher the heat sink installation, the greater the heat loss. since the heat is emitted from the heat sink, it is necessary to consider the convection problem and the heating when selecting the position. t...

the steel plate radiator was put into the market in 2019. it uses the global automotive cold-rolling special plate, and the thickness of the plate is 1.2mm, ensuring the maximum output of heat dissipation. the most important point is that the steel plate radiator is produced by the german production line. the radiator is n...